How to move Microsoft Management Reporter 2012 to a new server

The process for moving the Management Reporter 2012 database is as follows:
Note If you are using a Management Reporter 2012 provider that uses the Dynamic Datamart (DDM) database, do not move the DDM database. Instead, a new database will be created by using the process here.

1. Start the Management Reporter 2012 Configuration Console.
2. Click Management Reporter Services.
3. Record the name of the database listed under the Database connection heading. The database name will be listed after the SQL server name. For example: SQLServer (Database)
4. Record the name of the Service Account that is used.
5. Login to SQL Server Management Studio.
6. Backup the Management Reporter 2012 database recorded earlier in this topic.
7. Start the Management Reporter 2012 Report Designer.
8. Export each building block group. The reports can be re-imported if a failure were to occur. You can do this by following these steps:
a. Under the Company menu, click Building Block Groups.
b. Select the building block group to export.
c. Click Export.
d. Select all building blocks to be exported on the Report Definitions, Row Definitions, Column Definitions, Reporting Tree Definitions tabs. Also, select all Dimension Value Sets.
e. Click Export.
f. Choose a location to save the .tdbx export file.
Note The default path on a Windows Server 2008 server is C:\Users\\Documents\Management Reporter\Building Block Groups
g. Click Close on the Building Block Groups window.
9. Exit Management Reporter 2012 Report Designer.
10. Start the Management Reporter 2012 Configuration Console.
11. In the navigation bar, click the name of the SQL server.
12. Click Remove to remove the ERP integration.
13. Click Yes to the prompt “Are you sure you want to remove the ERP Integration?”
14. In the navigation bar, click Management Reporter Services.
15. Click Remove Process Service.
16. Click Yes to the prompt “Are you sure you want to remove ‘Management Reporter 2012 Process Service’?”
17. Click Remove Application Service.
18. Click Yes to the prompt “Are you sure you want to remove ‘Management Reporter 2012 Application Service’?”
19. Login to SQL Server Management Studio on the new SQL server.
20. Restore the Management Reporter 2012 database, that was created in step 6, on the new SQL server.
21. Verify that the Management Reporter 2012 service account has the correct permissions on the SQL server and to the new database. Refer to the Management Reporter installation guides at the following link:
Microsoft Management Reporter: Installation, Migration, and Configuration Guides
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5916
22. Using the instructions here, run the following script against the Management Reporter 2012 database on the new SQL server:

--////////////////////////////////////////////////////////////////
--
-- Script Instructions:
--
-- 1. Update the line in the following code, starting with 'CREATE MASTER KEY ENCRYPTION BY PASSWORD', to contain the
-- Master key you wish to use. The master key must meet the Windows password policy
-- requirements of the computer that is running the instance of SQL Server.
--
-- 2. Run this script against the Management Reporter 2012 database. This script
-- will output a message if it does not detect the Management Reporter 2012 database.
--
--////////////////////////////////////////////////////////////////

IF EXISTS (SELECT Name FROM sys.tables WHERE Name = 'ControlReportSchedule')
BEGIN
IF EXISTS (SELECT TOP(1) name FROM sys.symmetric_keys WHERE name = 'GeneralUserSymmetricKey')
DROP SYMMETRIC KEY GeneralUserSymmetricKey

IF EXISTS (SELECT TOP(1) name FROM sys.certificates WHERE name = 'GeneralUserCertificate')
DROP CERTIFICATE GeneralUserCertificate

IF EXISTS (SELECT TOP(1) name FROM sys.symmetric_keys WHERE name = 'ConnectorServiceSymmetricKey')
DROP SYMMETRIC KEY ConnectorServiceSymmetricKey

IF EXISTS (SELECT TOP(1) name FROM sys.certificates WHERE name = 'ConnectorServiceCertificate')
DROP CERTIFICATE ConnectorServiceCertificate

IF EXISTS (SELECT TOP(1) name FROM sys.symmetric_keys WHERE name = '##MS_DatabaseMasterKey##')
DROP MASTER KEY

CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'Access!23'
-- NOTE Where Access!23 is your actual password

CREATE CERTIFICATE [ConnectorServiceCertificate]
AUTHORIZATION [dbo]
WITH SUBJECT = N'Certificate for symmetric key encryption - for use by the connector service.'

CREATE CERTIFICATE [GeneralUserCertificate]
AUTHORIZATION [dbo]
WITH SUBJECT = N'Certificate for access symmetric keys - for use by users assigned to the GeneralUser Role.'

CREATE SYMMETRIC KEY [ConnectorServiceSymmetricKey]
AUTHORIZATION [dbo]
WITH ALGORITHM = AES_256
ENCRYPTION BY CERTIFICATE [ConnectorServiceCertificate]

CREATE SYMMETRIC KEY [GeneralUserSymmetricKey]
AUTHORIZATION [dbo]
WITH ALGORITHM = AES_256
ENCRYPTION BY CERTIFICATE [GeneralUserCertificate]

IF NOT EXISTS (SELECT TOP(1) name FROM sys.database_principals WHERE name='GeneralUser')
BEGIN
CREATE ROLE [GeneralUser]
AUTHORIZATION [dbo]
END

GRANT CONTROL ON CERTIFICATE::[GeneralUserCertificate] TO [GeneralUser]
GRANT VIEW DEFINITION on SYMMETRIC KEY::[GeneralUserSymmetricKey] TO [GeneralUser]
GRANT CONTROL ON CERTIFICATE::[ConnectorServiceCertificate] TO [GeneralUser]
GRANT VIEW DEFINITION on SYMMETRIC KEY::[ConnectorServiceSymmetricKey] TO [GeneralUser]

END
ELSE
BEGIN
PRINT 'WARNING: Incorrect database selected.'
Print 'Execute script against the Management Reporter 2012 database.'
PRINT 'This can be found in the Management Reporter 2012 Configuration Console.'
END

23. Start the Management Reporter 2012 Configuration Console.
24. Under the File menu, click Configure.
25. Put a check next to Management Reporter Application Service and Management Reporter Process Service.
26. Click Next.
27. Correct any issues noted on the Prerequisite Validation screen, and then click Next.
28. In the Service Account section, enter the name of the service account recorded earlier. Also enter the password for the service account.
29. In the Database Configuration section, put a check in Connect to an existing database.
30. Enter the name of the new SQL Server in the Database server field.
31. Select to use Windows authentication, or enter a SQL authenticated username and password.
32. In the Database dropdown, select the name of the newly restored Management Reporter 2012 database.
33. In the Application Service section, enter a port number for the application service to run on. If the Windows Firewall is enabled on the server, put a check next to Open this port in the Windows Firewall.
34. Click Next.
35. Click Configure.
36. Click Close on the Configure Management Reporter screen when the process is completed.
37. Under the File menu, click Configure.
38. Put a check next to the ERP that is correct for your environment.
39. Click Next.
40. Follow the instructions for the ERP for your environment using the appropriate guide at the following link:
Microsoft Management Reporter: Installation, Migration, and Configuration Guides
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5916

Moving Average White Paper for Microsoft Dynamics AX 2012

A new inventory model has been introduced in Microsoft Dynamics AX that is based on the moving average method. Moving average is an inventory valuation method that is used to compute the average cost of ending inventory.

This white paper covers the areas where work processes for inventory valuation have changed due to the introduction of the Moving average method. This includes the following areas:

• Issue cost will not be adjusted by running an inventory close with the moving average method since this is a pure perpetual model.
• Price differences between the point of product receipt and the invoice can be proportionally expensed.
• The handling of negative inventory, backdating of inventory transactions, adjustment of inventory values and posting of credit notes with Moving average.
•  How costing of production is supported by Moving average.

White paper can be downloaded directly from Download center

AX 2012 White Paper: Migrate from Product Builder to Product Configurator

We have been waiting for this since a long time and now finally Microsoft has made this available. Hopefully it will fulfill the requirements many users have been looking for.
Product configurator is scheduled to replace the Product builder module in the next major release after Microsoft Dynamics AX 2012. This whitepaper document provides information for partners and customers who want to migrate product models in Product builder to product configuration models in Product configurator. Download whitepaper here.

Refer Technet link below for Product Configuration in AX 2012:
About product configurator processes [AX 2012]

Attend an on demand webcast on Product Confugurator:
Microsoft Dynamics Webcast: Microsoft Dynamics AX 2012 Product Configurator (Level 100)
This sales force automation tool is designed to assist customers and customer service representatives in customizing products specific for customer specifications. In this webcast, we give an introduction to Product Configurator, cover setup, and take you through an example of a sales order entry by using Product Configurator. Finally, we discuss Product Configurator versus the previous Product Builder solution.

Presenter: Cary Gambrell, Microsoft Dynamics ERP Technical Specialist, Microsoft Corporation